{"title":"Pivot Kneebord System","description":"","products":[{"product_id":"pivot-case-for-ipad-mini-5th-gen","title":"Étui PIVOT pour iPad Mini (5e génération)","description":"\u003cp\u003e IMPORTANT : NON COMPATIBLE AVEC LE NOUVEL IPAD MINI 6ÈME GÉNÉRATION.\u003c\/p\u003e\n\n\u003cp\u003e Pour convertir votre genouillère Flyboys en étui pour iPad Mini, vous aurez besoin d'un étui pivotant pour l'iPad mini, d'un adaptateur de genouillère à profil bas et d'une genouillère Flyboys.\u003c\/p\u003e\n\n\u003cp\u003e N'inclut pas la planche à genoux ni l'adaptateur pour planche à genoux.\u003c\/p\u003e\n\n \u003cp\u003eLe PIVOT MINI est un étui polyvalent et robuste pour l'iPad Mini (5e génération) et l'iPad Mini 4. Il prend entièrement en charge toutes les fonctionnalités de ces modèles d'iPad, y compris le scanner d'empreintes digitales, les caméras, le microphone, etc. être en mesure de tirer le meilleur parti de votre iPad tout en offrant la meilleure protection contre les dommages de tous les étuis du marché. Avec une construction monobloc, une plaque supérieure entièrement en polycarbonate, une couche intérieure d'absorption des chocs et une coque renforcée, exploitez votre iPad au maximum de son potentiel tout en assurant une protection inégalée pour votre appareil, que vous soyez à la maison, sur la route ou dans votre avion. . Il se connecte en toute sécurité à n'importe quel support PIVOT à l'aide du système de montage breveté et exclusif PIVOT Click-Connect. Le système est simple et intuitif : faites glisser le boîtier sur la plaque de montage à travers le canal de montage Click-Connect jusqu'à ce que le clip intégré le maintienne en place avec un « CLIC ». Retirez le boîtier en appuyant simplement sur le haut du clip pour le libérer et faites glisser le boîtier hors du support.\u003c\/p\u003e\n\n\u003cul\u003e\n\n \u003cli\u003eProtection imbattable des appareils : dépasse les normes militaires les plus strictes sans encombrement ni poids inutiles.\u003c\/li\u003e\n\n\u003cli\u003e Housse Folio PIVOT : protection à 360 degrés. Dispose d'une béquille intégrée améliorée pour une visualisation confortable sous plusieurs angles.\u003c\/li\u003e\n\n\u003cli\u003e Conception de refroidissement supérieure : seulement 30 % de l'arrière de la coque entre directement en contact avec l'iPad, minimisant le transfert de chaleur et permettant la circulation de l'air à travers les aérations au bas de la coque.\u003c\/li\u003e\n\n\u003cli\u003e Fenêtre d'identification : située à l'arrière du boîtier, la fenêtre d'identification peut être utilisée pour afficher des étiquettes de suivi des actifs ou des informations de contact individuelles.\u003c\/li\u003e\n\n\u003cli\u003e Sorties de haut-parleurs améliorées : ouvertures de sortie de haut-parleurs 35 % plus grandes pour une qualité sonore améliorée.\u003c\/li\u003e\n\n\u003cli\u003e PIVOT Click-Connect : se fixe rapidement et en toute sécurité à n'importe quelle solution de montage PIVOT.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e Largeur : 5,59 po (142 mm)\u003c\/p\u003e\n\n\u003cp\u003e Hauteur : 8,32 po (211,50 mm)\u003c\/p\u003e\n\n\u003cp\u003e Épaisseur : 0,81 po (20,50 mm)\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003ePoids\u003c\/strong\u003e (en supposant que l'iPad Mini 5e génération)\u003c\/p\u003e\n\n\u003cp\u003e Caisse vide : 0,301 lb (0,291 kg)\u003c\/p\u003e\n\n\u003cp\u003e Étui + Folio Cover Vide : 0,641 lb (0,469 kg)\u003c\/p\u003e\n\n\u003cp\u003e Boîtier + appareil : 0,961 lb (0,592 kg)\u003c\/p\u003e\n\n \u003cp\u003eÉtui + Folio Cover + Appareil : 1,301 lb (0,892 kg)\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eMatériaux\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e Coque du boîtier : polycarbonate durci résistant aux chocs\u003c\/p\u003e\n\n\u003cp\u003e Couverture Folio : Caoutchouc TPU et Polycarbonate durci résistant aux chocs\u003c\/p\u003e\n\n\u003cp\u003e Largeur : 5,59 po (142 mm)\u003c\/p\u003e\n\n\u003cp\u003e Hauteur : 8,32 po (211,50 mm)\u003c\/p\u003e\n\n\u003cp\u003e Épaisseur : 0,81 po (20,50 mm)\u003c\/p\u003e\n\n\u003cp\u003e Poids (en supposant que l'iPad Mini 5e génération)\u003c\/p\u003e\n\n\u003cp\u003e Caisse vide : 0,301 lb (0,291 kg)\u003c\/p\u003e\n\n\u003cp\u003e Étui + Folio Cover Vide : 0,641 lb (0,469 kg)\u003c\/p\u003e\n\n\u003cp\u003e Boîtier + appareil : 0,961 lb (0,592 kg)\u003c\/p\u003e\n\n\u003cp\u003e Étui + Folio Cover + Appareil : 1,301 lb (0,892 kg)\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eMatériaux\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e Coque du boîtier : polycarbonate durci résistant aux chocs\u003c\/p\u003e\n\n\u003cp\u003e Couverture Folio : Caoutchouc TPU et Polycarbonate durci résistant aux chocs \u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/x30u9ZQBA10\" width=\"1195\" height=\"672\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"PIVOT","offers":[{"title":"Default Title","offer_id":32974247919698,"sku":"PC-MN5-GRY","price":195.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2457\/7775\/files\/pivot-case-for-ipad-mini-5th-gen-pivot-systems-pivot-pilot-shop-0np.jpg?v=1770946080"},{"product_id":"low-profile-kneeboard-adapter-for-pivot-case","title":"Adaptateur de genouillère à profil bas pour boîtier pivotant","description":"\u003cp\u003e N'inclut pas la planche à roulettes ni l'étui pivotant.\u003c\/p\u003e\n\n\u003cp\u003e Transformez n'importe quelle genouillère FlyBoys en un support de jambe de sac de vol électronique avec l'adaptateur de genouillère à profil bas PIVOT et l'étui PIVOT. La base moulée et la plaque de montage rotative offrent la conception la plus fine et la plus sécurisée pour monter un appareil sur la cuisse du pilote.\u003c\/p\u003e\n\n \u003cp\u003eL'insert de genouillère est un remplacement de presse-papiers pliable. Insérez-le simplement dans la poche du presse-papiers et faites passer la sangle pour carte sous et à travers la plaque de montage.\u003c\/p\u003e\n\n\u003cp\u003e Dos caoutchouté pour plus de stabilité\u003cbr\u003e Base moulée avec crans rotatifs tous les 30 degrés\u003cbr\u003e Supports supérieurs et inférieurs du fond du boîtier pour une plus grande stabilité.\u003cbr\u003e La plaque de base est basée sur la norme VESA pour une compatibilité de montage personnalisée.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e Longueur : 8,00 po (203,2 mm)\u003c\/p\u003e\n\n\u003cp\u003e Largeur : 5,25 po (133,35 mm)\u003c\/p\u003e\n\n\u003cp\u003e Poids : 5,83 onces (165,28 g)\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eMatériaux\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e Plaque de montage PIVOT et support : polycarbonate résistant aux chocs\u003c\/p\u003e\n\n\u003cp\u003e Insert de genouillère : 600D\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eCompatible avec:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e Tout cas PIVOT, passé, présent ou futur.\u003c\/p\u003e\n\n\u003cp\u003e Genouillère réversible FlyBoys FB3316\u003c\/p\u003e\n\n\u003cp\u003e Genouillère classique FlyBoys FB1316 \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/x30u9ZQBA10\" width=\"1195\" height=\"672\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"PIVOT","offers":[{"title":"Default Title","offer_id":32974247952466,"sku":"PC-ADAPT-1316","price":74.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2457\/7775\/files\/low-profile-kneeboard-adapter-for-pivot-case-pivot-systems-pivot-pilot-shop-0tq.jpg?v=1770946024"},{"product_id":"flyboys-pivot-single-suction-cup-mount","title":"Support à ventouse simple PIVOT","description":"\u003cp\u003e Nécessite : étui PIVOT, vendu séparément.\u003c\/p\u003e\n\n \u003cp\u003eLe support à ventouse unique PIVOT, populaire dans toute l'industrie aérienne et militaire, se fixe à toute surface non poreuse avec une adhérence inébranlable grâce à la ventouse verrouillable de qualité aéronautique. Testé en laboratoire pour supporter jusqu'à 4 livres à 20 g, le support à ventouse unique PIVOT Classic est conçu pour résister aux environnements opérationnels les plus exigeants. La plaque de montage et le bras sont réglables pour fournir l'angle de vision idéal pour presque toutes les applications.\u003c\/p\u003e\n\n\u003cp\u003e Solution de montage complète : comprend tout le matériel nécessaire pour monter un boîtier PIVOT dans pratiquement n'importe quel avion, véhicule, bureau ou autre surface non poreuse.\u003cbr\u003e Ventouse verrouillable PanaVise : poignée presque incassable grâce à la ventouse bimode activée mécaniquement.\u003cbr\u003e PIVOT Click-Connect : se fixe rapidement et en toute sécurité à n'importe quel étui PIVOT.\u003cbr\u003e Approuvé par la FAA : testé et approuvé par la FAA pour une utilisation en vol. Cette monture précise est actuellement largement utilisée dans l’industrie aéronautique et l’aviation militaire. \u003cbr\u003e(Le support à double ventouse PIVOT est recommandé pour les applications sur hélicoptère).\u003c\/p\u003e\n\n\u003cp\u003e Dimensions\u003c\/p\u003e\n\n\u003cp\u003e Diamètre de la ventouse : 3,25 po (82,55 mm)\u003c\/p\u003e\n\n\u003cp\u003e Hauteur (étendue verticalement) : 6,25 po (158,75 mm)\u003c\/p\u003e\n\n\u003cp\u003e Matériaux\u003c\/p\u003e\n\n\u003cp\u003e Plaque de montage PPK-1 : polycarbonate résistant aux chocs, caoutchouc TPU\u003c\/p\u003e\n\n\u003cp\u003e Adaptateur PIVOT Dogbone : Polycarbonate résistant aux chocs\u003c\/p\u003e\n\n\u003cp\u003e Bras incurvé PanaVise : acier inoxydable, polycarbonate résistant aux chocs\u003c\/p\u003e\n\n\u003cp\u003e Base : Polycarbonate résistant aux chocs\u003c\/p\u003e\n\n\u003cp\u003e Ventouse : polypropylène de qualité aéronautique\u003c\/p\u003e\n\n\u003cp\u003e Poids : 9,54 onces (g)\u003c\/p\u003e\n\n\u003cp\u003e Compatibilité – Tous les cas PIVOT, passés, présents et futurs.\u003c\/p\u003e","brand":"PIVOT","offers":[{"title":"Default Title","offer_id":39443797442642,"sku":"809PPK-PB","price":129.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2457\/7775\/files\/pivot-single-suction-cup-mount-pivot-systems-pivot-pilot-shop-0li.jpg?v=1770945973"},{"product_id":"pivot-leg-strap","title":"Sangle de jambe PIVOT","description":"\u003cp\u003e À utiliser avec les boîtiers de solution de montage PIVOT.\u003c\/p\u003e\n\n\u003cp\u003e Compacte, profilée et ergonomique, la sangle de jambe PIVOT fixe solidement n'importe quel étui PIVOT (vendu séparément) à la jambe du pilote, tout en offrant une large gamme de réglages. Comprend deux sangles de jambe réglables pour garantir un ajustement confortable, tandis que la languette de verrouillage et le dessous texturé garantissent que la sangle de jambe reste bien en place pendant toutes les phases de vol. L'attache de ceinture incluse offre une sécurité supplémentaire en maintenant la sangle de jambe fermement en position, même pendant la marche.\u003c\/p\u003e\n\n\u003cp\u003e Comprend :\u003c\/p\u003e\n\n\u003cp\u003e Support de plaque de montage (1)\u003cbr\u003e Sangle de jambe S\/M (1)\u003cbr\u003e Sangle de jambe L\/XL (1)\u003cbr\u003e Attache de ceinture (1)\u003cbr\u003e Adaptateur de dragonne (1)\u003c\/p\u003e\n\n\u003cp\u003e Étui PIVOT vendu séparément.\u003c\/p\u003e\n\n\u003cp\u003e Plaque de montage PIVOT rotative : offre une large gamme d'orientations de visualisation de l'appareil. \u003cbr\u003ePIVOT Cliquez-Connectez-vous. Entièrement compatible avec n'importe quel boîtier PIVOT, passé, présent ou futur.\u003cbr\u003e Deux sangles de jambe réglables : offrent un ajustement confortable et sécurisé pour pratiquement tout le monde.\u003cbr\u003e Attache de ceinture : offre une sécurité supplémentaire à la sangle de jambe, la maintenant fermement en place, même lorsque vous marchez.\u003c\/p\u003e\n\n\u003cp\u003e Dimensions\u003c\/p\u003e\n\n\u003cp\u003e Largeur : 4,125 po (104,775 mm)\u003c\/p\u003e\n\n\u003cp\u003e Longueur (sangle L\/XL attachée et entièrement déployée) : 31,50 po (80,0 cm)\u003c\/p\u003e\n\n\u003cp\u003e Poids (avec sangle L\/XL) : 5,53 oz (156,77 g)\u003c\/p\u003e\n\n\u003cp\u003e Matériaux\u003c\/p\u003e\n\n\u003cp\u003e Plaque de montage et support PIVOT : polycarbonate résistant aux chocs\u003c\/p\u003e\n\n\u003cp\u003e Plaque de montage : 600D\u003c\/p\u003e\n\n\u003cp\u003e Sangle de jambe : Élastique\/Nylon\u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e","brand":"PIVOT","offers":[{"title":"Default Title","offer_id":39484402401362,"sku":"PC-LS1-BLK","price":99.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2457\/7775\/files\/pivot-leg-strap-pivot-systems-pivot-pilot-shop-0rr.jpg?v=1770946108"},{"product_id":"pivot-to-1-inch-ball-adapter-rubberized-ball","title":"Adaptateur PIVOT vers boule de 1 pouce - Boule caoutchoutée","description":"\u003cp\u003e L'adaptateur PIVOT vers boule de 1 pouce permet la connexion entre la plaque de montage PIVOT PPK-1 et n'importe quelle douille à bille de 1 pouce (par exemple, comme celle utilisée par RAM Mounts) à l'aide d'une boule RAM caoutchoutée de 1 pouce.\u003c\/p\u003e\n\n \u003cp\u003eCela permet la conversion de nombreux supports RAM existants pour s'adapter aux cas PIVOT.\u003c\/p\u003e\n\n\u003cp\u003e Plaque de montage PPK-1 incluse.\u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eCaractéristiques\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Durable : construit en aluminium T6 noir anodisé.\u003c\/li\u003e\n\n\u003cli\u003e Flexible : s'adapte à n'importe quelle douille à bille RAM de 1\" pour une compatibilité avec les boîtiers PIVOT.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e PM-RM-240 Longueur : 2,25 pouces (57,15 mm) (sans PPK-1)\u003c\/p\u003e\n\n\u003cp\u003e PM-RM-250 Longueur : 2,75 pouces (69,85 mm) (sans PPK-1)\u003c\/p\u003e\n\n\u003cp\u003e Diamètre de l'adaptateur à bille PPK-1 : 0,75 po (19,05 mm)\u003c\/p\u003e\n\n\u003cp\u003e Diamètre de l'adaptateur de boule RAM : 1,00 po (25,4 mm)\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eMatériaux:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e Collier Dogbone : aluminium 6061-T6, anodisé\u003c\/p\u003e\n\n\u003cp\u003e Adaptateur de boule RAM : Caoutchouc\u003c\/p\u003e","brand":"PIVOT","offers":[{"title":"Default Title","offer_id":39506834161746,"sku":"PV-SM8-FB-100","price":69.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2457\/7775\/files\/pivot-to-1-inch-ball-adapter-rubberized-ball-pivot-systems-pivot-pilot-shop-0l1.jpg?v=1770946041"},{"product_id":"pivot-a22a-atlas-series-fits-ipad-10th-gen","title":"PIVOT A22A Série Atlas - Compatible avec iPad (10e génération)","description":"\u003cp\u003eThe PIVOT A22A case is built for the iPad (A16) and iPad (10th gen.), delivering rugged 360° protection against drops, impacts, and scratches. It connects quickly to mounts and accessories using the patented PIVOT Universal Mounting System. It includes an upgraded Folio Cover that protects the screen, reinforces corners and edges, and supports multiple viewing angles in landscape mode. Use it with the reinforced PIVOT Kickstand for added stability and flexible viewing in both portrait and landscape. A detachable Smart Edge enables use with the Apple Magic Keyboard Folio, while the Pencil Grip secures your Apple Pencil (1st gen.). Precision design ensures clear Wi-Fi, GPS, and LTE performance.\u003c\/p\u003e\n\u003cp\u003eFor increased productivity, pair the PIVOT A22A case with the PIVOT KA22A Bluetooth Keyboard to create a complete, mobile workstation designed for efficient typing, data entry, and on-the-go performance.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSupports the features and accessories for the iPad (10th gen.) and iPad (A16)\u003c\/li\u003e\n\u003cli\u003ePIVOT \"Click!\" Connection: Quickly and securely attaches to any PIVOT mounting solution\u003c\/li\u003e\n\u003cli\u003e360-degree Protection: Unbeatable damage protection from drops, impacts, and scratches, exceeding exacting performance standards without unnecessary bulk or weight.\u003c\/li\u003e\n\u003cli\u003ePIVOT Smart Edge: Compatible with the Apple Magic Keyboard Folio.\u003c\/li\u003e\n\u003cli\u003ePIVOT Folio Cover: Upgraded features provide superior screen protection when in transit.\u003c\/li\u003e\n\u003cli\u003ePIVOT AirTag Socket: Never lose your case or iPad! Securely and discreetly accommodates the Apple AirTag* to ensure that your device is trackable even if it has lost all charge or has been powered down.\u003c\/li\u003e\n\u003cli\u003ePIVOT Kickstand: Thicker and reinforced with internal ribs for unbeatable strength and durability. The new PIVOT Kickstand features 120- degrees of adjustability to support a wide variety of horizontal viewing angles, while also supporting vertical viewing.\u003c\/li\u003e\n\u003cli\u003ePIVOT Pencil Grip: Provides secure storage and protection for the Apple Pencil (1st gen.).\u003c\/li\u003e\n\u003cli\u003eMinimal Contact Design: Only a small fraction of the case directly contacts the device, minimizing heat transfer and allowing air circulation through vents in the case back. Minimal contact decreases the potential for scratches on the iPad device, maximizing future resale or trade-in value.\u003c\/li\u003e\n\u003cli\u003eFlawless Signal Reception: Specialized case features ensure unimpeded Wi-Fi, GPS and LTE signal reception.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*\u003cem\u003eNote: Confirm iPad accessory compatibility with device manufacturer. Not all accessories are compatible with all iPad models. Apple AirTag not included.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003cbr\u003eLength: 10.34 in (262.63 mm)\u003cbr\u003eWidth: 7.62 in (193.51 mm)\u003cbr\u003eThickness: 1.0 in (25.33 mm)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight\u003cbr\u003e\u003c\/strong\u003eCase Empty: 0.50 lbs (0.23 kg)\u003cbr\u003eCase + Folio Cover Empty: 1.03 lbs (0.47 kg)\u003cbr\u003eCase + Folio Cover + iPad (10th gen.): 1.56 lbs (0.71 kg) \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials\u003cbr\u003e\u003c\/strong\u003eCase Shell + Folio Cover: Hardened Impact-Resistant Polycarbonate, TPU Rubber\u003c\/p\u003e","brand":"PIVOT","offers":[{"title":"Default Title","offer_id":40722041995346,"sku":"PC-A22A-BLK","price":299.95,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2457\/7775\/files\/PC-A22A-BLK.jpg?v=1772418528"},{"product_id":"pivot-a35a-fits-ipad-mini-6th-gen-and-ipad-mini-a17-pro","title":"PIVOT A35A - iPad mini 6 \/ A17 Pro","description":"\u003cp\u003eThe PIVOT A35A from PIVOT, with updated design to protect the iPad mini (6th gen.) and iPad mini (A17 Pro). Connect the A35A case quickly and securely to mounts and accessories using the patented PIVOT universal mounting system. Be confident with excellent 360-degree protection from drops, impacts, and scratches. The upgraded PIVOT Folio Cover provides full-coverage screen protection when in transit and increased impact resistance on corners and edges. Additionally, the Folio Cover offers quick-viewing support in landscape orientation with a selection of viewing positions. Use the Folio Cover in combination with the PIVOT Kickstand for viewing with enhanced stability and a wide range of adjustable viewing angles. The updated PIVOT Kickstand is thicker and reinforced with internal ribs and locking tabs for increased strength and offers 120-degrees of adjustability in landscape orientation, as well as table-top viewing in both landscape and portrait orientation.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"550\" height=\"309\" src=\"https:\/\/www.youtube.com\/embed\/WJnSf07-HFI\" title=\"Why the Pivot A35A Is the Best iPad Mini Case Ever! Field Test \u0026amp; Features Breakdown\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eThe PIVOT A35A supports the features and accessories for the iPad mini (6th gen.) and iPad mini (A17 Pro). The removable PIVOT Pencil Edge securely holds the Apple Pencil Pro* in place. Specialized case features facilitate flawless Wi-Fi, GPS, and LTE signal reception.\u003c\/p\u003e\n\u003cp\u003eOrder the PIVOT A35A today and discover why commercial airlines and military units worldwide choose PIVOT for their EFB operations. PIVOT is: Better Connection. Better Protection.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupports the features and accessories for the iPad mini (6th gen.) and iPad mini (A17 Pro).\u003c\/li\u003e\n\u003cli\u003ePIVOT Connection: Quickly and securely attaches to any PIVOT mounting solution.\u003c\/li\u003e\n\u003cli\u003e360-degree Protection: Excellent damage protection from drops, impacts, and scratches, exceeding exacting performance standards without unnecessary bulk or weight.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePIVOT Folio Cover: Upgraded features provide superior screen protection when in transit.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUpdated PIVOT Kickstand: Thicker and and reinforced with internal ribs for increased strength and durability. The updated PIVOT Kickstand features 120- degrees of adjustability to support a wide variety of horizontal viewing angles, while also supporting vertical viewing.\u003c\/li\u003e\n\u003cli\u003ePIVOT Pencil Edge: Provides secure storage and protection for the Apple Pencil Pro* (not included).\u003c\/li\u003e\n\u003cli\u003eMinimal Contact Design: Only a small fraction of the case directly contacts the device, minimizing heat transfer and allowing air circulation through vents in the case back. Minimal contact decreases the potential for scratches on the iPad device, maximizing future resale or trade-in value.\u003c\/li\u003e\n\u003cli\u003eFlawless Signal Reception: Specialized case features ensure unimpeded Wi-Fi, GPS and LTE signal reception.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions\u003cbr\u003eWidth: 5.31 in (134.8 mm)\u003cbr\u003eHeight: 7.69 in (195.4 mm)\u003cbr\u003eThickness: 0.25 in (6.3 mm)\u003c\/p\u003e\n\u003cp\u003eWeight\u003cbr\u003eCase Empty: 0.40 lbs (0.18 kg)\u003cbr\u003eCase + Folio Cover Empty: 0.70 lbs (0.32 kg)\u003cbr\u003eCase + Folio Cover + iPad mini (A17 Pro): 1.76 lbs ( 0.8 kg) \u003c\/p\u003e\n\u003cp\u003eMaterials\u003cbr\u003eCase Shell + Folio Cover: Hardened Impact-Resistant Polycarbonate, TPU Rubber\u003c\/p\u003e\n\u003cp\u003eCompatibility\u003cbr\u003eiPad mini (6th gen.)\u003cbr\u003eiPad mini (A17 Pro)\u003c\/p\u003e","brand":"PIVOT","offers":[{"title":"Default Title","offer_id":42006333816914,"sku":"PC-A35A-BLK","price":299.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2457\/7775\/files\/pivot-a35a-ipad-mini-6-a17-pro-pivot-systems-pivot-pilot-shop-0js.webp?v=1770946059"},{"product_id":"pivot-articulating-claw-mount-small","title":"PIVOT Articulating Mount - Medium Claw","description":"\u003cp\u003eBased on the popular PIVOT Claw Mount, the PIVOT Articulating Claw Mount features a double socket swivel and ratchet arm with 360-degree centre rotation and a 180-degree swivel joint. This allows greater flexibility in adjustment and device positioning. Thanks to the incredible clamping power from the Tough-Claw Clamp, the PIVOT Articulating Claw Mount will not lose its grip, ensuring that your device remains exactly where you mounted it.\u003c\/p\u003e\n\u003cp\u003eThe clamp is available in two sizes: The small clamp works on round, square, and odd-shaped rails and bars ranging from 0.625” to 1.5” in diameter, and flat surfaces ranging from 0” to 1.14” in thickness. The medium clamp works on round, square, and odd-shaped rails and bars ranging from 1” to 1.875” in diameter, and flat surfaces ranging from 0” to 1.6” in thickness. High strength composite and stainless-steel hardware ensures durability and reliability in the most demanding environments. Ideal for applications where space is at a premium.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComplete Mounting Solution: Includes all hardware necessary to mount a PIVOT case in virtually any aircraft, vehicle, or other location where the clamp can be attached\u003c\/li\u003e\n\u003cli\u003ePIVOT \"Click!\" Connection: Quickly and securely attaches to any PIVOT case\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions\u003cbr\u003e\u003c\/strong\u003eOverall Length:\u003cbr\u003eSmall Claw Mount: 11.50-in (29.21 cm), \u003cbr\u003eMedium Claw Mount - 12.5-in (31.75 cm)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight\u003cbr\u003e\u003c\/strong\u003eSmall Claw Mount: 12.8 oz (362.9 g)\u003cbr\u003eMedium Claw Mount: 17.6 oz (499.0 g)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight Capacity\u003cbr\u003e\u003c\/strong\u003e2.0 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClamp Range\u003cbr\u003e\u003c\/strong\u003eRound\/cylindrical surfaces:\u003cbr\u003eSmall Claw: 0.625\" - 1.5\" outer diameter, Flat Surfaces: 0.00\" - 1.14\" in thickness\u003cbr\u003eMedium Claw: 1” to 1.875” in outer diameter, Flat Surfaces: 0” - 1.6” in thickness \u003c\/p\u003e","brand":"PIVOT","offers":[{"title":"Default Title","offer_id":42037347614802,"sku":"PM-MCLS-3","price":199.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2457\/7775\/files\/pivot-articulating-mount-medium-claw-apple-mounts-pivot-pilot-shop-0du.jpg?v=1778203655"},{"product_id":"pivot-a32a-for-ipad-pro-11-inch-m4-m5","title":"PIVOT A32A For iPad Pro 11-inch (M4, M5)","description":"\u003cp\u003eThe PIVOT A32A is PIVOT’s thinnest rugged case, designed specifically for iPad Pro 11-inch (M4, M5). It delivers dependable 360° protection against drops, impacts, and scratches, and connects quickly to mounts and accessories using the patented PIVOT Universal Mounting System. The case includes an upgraded Folio Cover for full-coverage screen protection, reinforced corners and edges, and multiple viewing angles in landscape mode. When paired with the reinforced PIVOT Kickstand, it provides enhanced stability with up to 120° of adjustability and supports tabletop viewing in both portrait and landscape. The Pencil Grip securely stores the Apple Pencil Pro and similar styluses, while precision design ensures clear Wi-Fi, GPS, and LTE performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupports the features and accessories for the iPad Pro 11-inch (M4, M5).\u003c\/li\u003e\n\u003cli\u003ePIVOT \"Click!\" Connection: Quickly and securely attaches to any PIVOT mount.\u003c\/li\u003e\n\u003cli\u003e360-degree Protection: Excellent damage protection from drops, impacts, and scratches, exceeding exacting performance standards without unnecessary bulk or weight.\u003c\/li\u003e\n\u003cli\u003ePIVOT Folio Cover: Upgraded features provide superior screen protection when in transit.\u003c\/li\u003e\n\u003cli\u003ePIVOT AirTag Socket: Never lose your case or iPad! Securely and discretely accommodates the Apple AirTag to ensure that your device is trackable even if it has lost all charge or has been powered down.\u003c\/li\u003e\n\u003cli\u003eUpdated PIVOT Kickstand: Thicker and reinforced with internal ribs for increased strength and durability. The updated PIVOT Kickstand features 120-degrees of adjustability to support a wide variety of horizontal viewing angles, while also supporting vertical viewing.\u003c\/li\u003e\n\u003cli\u003ePIVOT Pencil Grip: Provides secure storage and protection for the Apple Pencil Pro.\u003c\/li\u003e\n\u003cli\u003eMinimal Contact Design: Only a small fraction of the case directly contacts the device, minimizing heat transfer and allowing air circulation through vents in the case back. Minimal contact decreases the potential for scratches on the iPad device, maximizing future resale or trade-in value.\u003c\/li\u003e\n\u003cli\u003eFlawless Signal Reception: Specialized case features ensure unimpeded Wi-Fi, GPS and LTE signal reception.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*\u003cem\u003eNote: Confirm iPad accessory compatibility with device manufacturer. Not all accessories are compatible with all iPad models.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatability\u003c\/strong\u003e:\u003cbr\u003eFor iPad Pro 11-inch (M4, M5)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003cbr\u003eLength: 10.37 in (263.51 mm)\u003cbr\u003eWidth: 7.54 in (191.51 mm)\u003cbr\u003eThickness: 0.92 in (23.52 mm)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003cbr\u003eCase Empty: 0.49 lbs (0.22 kg)\u003cbr\u003eCase + Folio Cover Empty: 0.73 lbs (0.46 kg)\u003cbr\u003eCase + Folio Cover + iPad Pro 11-inch (M4): 2.0 lbs (.91 kg)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials\u003c\/strong\u003e\u003cbr\u003eCase Shell + Folio Cover: Hardened Impact-Resistant Polycarbonate, TPU Rubber\u003c\/p\u003e","brand":"PIVOT","offers":[{"title":"Default Title","offer_id":42260048773202,"sku":"PC-A32A-BLK","price":299.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2457\/7775\/files\/pivot-a32a-for-ipad-pro-11-inch-m4-m5-pivot-systems-pivot-pilot-shop-0y4.jpg?v=1770946090"},{"product_id":"pivot-articulating-claw-mount-small-1","title":"PIVOT Articulating Mount - Small Claw","description":"\u003cp\u003eBased on the popular PIVOT Claw Mount, the PIVOT Articulating Claw Mount features a double socket swivel and ratchet arm with 360-degree centre rotation and a 180-degree swivel joint. This allows greater flexibility in adjustment and device positioning. Thanks to the incredible clamping power from the Tough-Claw Clamp, the PIVOT Articulating Claw Mount will not lose its grip, ensuring that your device remains exactly where you mounted it.\u003c\/p\u003e\n\u003cp\u003eThe clamp is available in two sizes: The small clamp works on round, square, and odd-shaped rails and bars ranging from 0.625” to 1.5” in diameter, and flat surfaces ranging from 0” to 1.14” in thickness. The medium clamp works on round, square, and odd-shaped rails and bars ranging from 1” to 1.875” in diameter, and flat surfaces ranging from 0” to 1.6” in thickness. High strength composite and stainless-steel hardware ensures durability and reliability in the most demanding environments. Ideal for applications where space is at a premium.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComplete Mounting Solution: Includes all hardware necessary to mount a PIVOT case in virtually any aircraft, vehicle, or other location where the clamp can be attached\u003c\/li\u003e\n\u003cli\u003ePIVOT \"Click!\" Connection: Quickly and securely attaches to any PIVOT case\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions\u003cbr\u003e\u003c\/strong\u003eOverall Length:\u003cbr\u003eSmall Claw Mount: 11.50-in (29.21 cm), \u003cbr\u003eMedium Claw Mount - 12.5-in (31.75 cm)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight\u003cbr\u003e\u003c\/strong\u003eSmall Claw Mount: 12.8 oz (362.9 g)\u003cbr\u003eMedium Claw Mount: 17.6 oz (499.0 g)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight Capacity\u003cbr\u003e\u003c\/strong\u003e2.0 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClamp Range\u003cbr\u003e\u003c\/strong\u003eRound\/cylindrical surfaces:\u003cbr\u003eSmall Claw: 0.625\" - 1.5\" outer diameter, Flat Surfaces: 0.00\" - 1.14\" in thickness\u003cbr\u003eMedium Claw: 1” to 1.875” in outer diameter, Flat Surfaces: 0” - 1.6” in thickness \u003c\/p\u003e","brand":"PIVOT","offers":[{"title":"Default Title","offer_id":42389843050578,"sku":"PM-SCLS-3","price":199.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2457\/7775\/files\/pivot-articulating-mount-small-claw-apple-mounts-pivot-pilot-shop-0kj.webp?v=1778203660"},{"product_id":"pivot-a27a-ipad-pro-12-9-13-inch","title":"PIVOT A27A - iPad Pro 12.9 \u0026 13 inch","description":"\u003cp\u003eiPad Air 13-inch (M2, M3, M4)\u003cbr\u003eiPad Pro 13-inch (M4, M5)\u003cbr\u003eiPad Pro 12.9-inch (5th-6th gen.)\u003c\/p\u003e\n\u003cp\u003eThe PIVOT A27A is a rugged, large-format case for iPad Air 13-inch (M2, M3, M4), iPad Pro 13-inch (M4, M5), and iPad Pro 12.9-inch (5th–6th gen.), delivering reliable 360° protection from drops, impacts, and scratches. It connects quickly to mounts and accessories using the patented PIVOT Universal Mounting System. The case includes an upgraded Folio Cover for full-coverage screen protection and reinforced corners and edges, with multiple landscape viewing angles. When paired with the reinforced PIVOT Kickstand, it provides enhanced stability with up to 120° of adjustability and supports tabletop viewing in portrait and landscape. A Device Spacer is included for compatibility with iPad Pro 13-inch (M4, M5), while the Pencil Grip stores the Apple Pencil Pro and similar styluses securely. \u003c\/p\u003e","brand":"PIVOT","offers":[{"title":"Default Title","offer_id":42389878079570,"sku":"PC-A27A-BLK","price":299.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2457\/7775\/files\/pivot-a27a-ipad-pro-12-9-13-inch-pivot-systems-pivot-pilot-shop-0vd.webp?v=1778203628"}],"url":"https:\/\/pilotshop.co.nz\/fr\/collections\/pivot-kneebord-system.oembed","provider":"Pilot Shop","version":"1.0","type":"link"}