RAM X-Grip for Large 9"-10" Tablets with Mounting Options

Includes:

• 1x device holder (cradle)
• 1x arm (3" length) and 1x choice of mount (optional)

Choose from one of 7 mounting options:

• Cradle without mount
• Cradle with RAM Screw down mount
• Cradle with RAM Single Suction mount
• Cradle with RAM Dual Pivot Suction mount
• Cradle with RAM Tough-Claw clamp
• Cradle with RAM Yoke Clamp
• Cradle with RAM Handlebar U-Bolt clamp

Fits 9" to 10" tablets and other devices that fit the dimensions below

Contact our team if you would like assistance checking the compatibility of your device.

The RAM X-Grip universal holder for 9"-10" tablets features an 'X' design that expands and contracts to provide a perfect fit for your device – even if it's in a case. Included are easy access grip knobs located on the back of the cradle for quick release of your tablet. No matter what double socket arm and mounting base you pair the RAM X-Grip with, RAM ball and socket technology allows for near-infinite adjustability to achieve the ideal viewing angle – while also extending the life of your device by providing shock and vibration damping. This version of the RAM X-Grip holder is compatible with tablets that will fit the dimensions listed below. It is important to verify the dimensions of device with its case, sleeve, or skin when determining the overall size.

Features

• Spring-loaded 'X' design with rubber caps sports great holding power without hiding your tablet; fits most 9"-10" tablets
• Easy access grip knobs on the back of the holder allow for the quick release of your tablet
• Made of high-strength composite and steel components for durability and reliability in the most demanding environments

HARDWARE INCLUDED
Assembly Hardware
(4) #8-32 x 1/2" Sheet Metal Screws
(2) #8-32 x 5/8" Sheet Metal Screws

HOLDER DIMENSIONS
Max Height: 10.25" (using optional supports)
Width Range: 6.25" - 8.1"
Max Depth: .875"

HOLE PATTERN
(3) 4-Hole AMPS: 1.181" x 1.496"
75 x 75mm VESA

Mounting Options

Screw-Down

• The RAM-B-202U consists of a 1" B size rubber ball connected to a 2.5" diameter round plate. This mounting component includes pre-drilled holes using the universal AMPS hole pattern.

• HOLE PATTERN: 4-Hole AMPS: 1.181" x 1.496", 3-Hole 120-Degree: 1.812" Diameter
• PLATE SIZE: 2.5" Diameter

Suction Cup

• The RAM-B-224-1U suction cup base consists of a 3.3" diameter RAM Twist-Lock suction cup connected to a RAM-B-238U diamond base with a 1" B size rubber ball. The RAM Twist-Lock suction cup base is a fan favourite for use on vehicle windshields, and provides an extra strong hold on any smooth, nonporous surface
• SUCTION SIZE: 3.3" Diameter

Dual Pivot Suction Cups

• With the ability to independently articulate each suction cup, this mounting base can be used in a variety of applications such as curved windows and surfaces. Whether you are mounting to a curved surface on a vehicle, or a curved windshield, this product is the ideal solution for secure suction cup mounting.
• SUCTION SIZE: (2) 3.3" Diameter Bases, Total Width 7.95"

Tough Claw

• The RAM Tough-Claw is the perfect mounting base for toolless installation and removal on round, square, and odd-shaped rails and bars. The small version of the RAM Tough-Claw can quickly be clamped on rails ranging from .625" to 1.14" in outer diameter and is ideal for mounting phones, tablets, action cameras, rod holders, and much more in a wide variety of applications.
• CLAMP RANGE: .625" - 1.14" diameter

Yoke Clamp

• The yoke clamp base will fit rails in diameter from 0.625" to a maximum of 1.25". The 1" rubber ball is at a right angle to the plane of the mount; when connected to a rail, the ball sits parallel to the rail.
• CLAMP RANGE: .625" - 1.25"

Handlebar U-Bolt

• Ideal for motorcycle handlebars, the RAM-B-231ZU consists of a 1" B size rubber ball attached to a zinc-coated metal U-bolt base. Designed to sit at right angles to the mounting rail, the U-bolt base accommodates rails from .5" to 1.25" in diameter. Included are black cover caps to be placed over the exposed ends of the U-bolt as well as a composite adapter that can narrow the rail to a minimum width of .5".

• HARDWARE INCLUDED
• (1) 1/4"-20 U-Bolt for .5" - 1" Rails
• (1) 1/4"-20 U-Bolt for 1" - 1.25" Rails
• (2) 1/4"-20 Nylock Nuts
• (2) Rubber Caps
• (1) U-Bolt Spacer
• CLAMP RANGE: .5" - 1.25" diameter