RAM EZ-Roll'r Holder for iPad Pro 11" (1st - 4th Gen) and Air (4th & 5th Gen) with Mounting Options

RAM EZ-Roll'r Holder for iPad Pro 11" (1st - 4th Gen) and Air (4th & 5th Gen) with Mounting Options

View more products from RAM Mount SKU: RAM-HOL-AP23U-SCREW

$139.80

GST includedShipping Info


Current Stock
Order by 3pm and your order ships today! (Mon-Fri)
With Screw-Down Base $139.8 - We have 2 In Stock
With Single Suction Cup Mount $163.8 - We have 2 In Stock
With Dual Pivot Suction Cups $249.8 - We have 1 In Stock
With Tough-Claw Clamp $197.8 - We have 2 In Stock
With Yoke Clamp $183.8 - We have 2 In Stock
With Handlebar U-Bolt Clamp $156.8 - We have 2 In Stock
With Glare Shield Clamp $183.8 - We have 2 In Stock
With Large Strap Hose Clamp $163.8 - We have 1 In Stock
Cradle Without Mount $58.95 - We have 2 In Stock

Low Stock

If your option is out of stock don't worry more stock is on the way, select your option and enter your email address in the box and we will notify you the minute the shipment arrives




Includes

  • 1x iPad holder (cradle)
  • 1x arm (3" length)  and 1x choice of mount (optional)

Choose from one of 9 mounting options:

  • Cradle without mount
  • Cradle with RAM Screw-down base
  • Cradle with RAM Single Suction cup
  • Cradle with RAM Dual Pivot Suction cups
  • Cradle with RAM Tough-Claw clamp
  • Cradle with RAM Yoke clamp
  • Cradle with RAM Handlebar U-Bolt clamp
  • Cradle with RAM Glare Shield Clamp for aircraft glare shield or car window ledge
  • Cradle with RAM Large Strap Hose Clamp for Beechcraft Bonanza aircraft

Fits the iPad Pro 11" (1st, 2nd & 3rd Gen) and iPad Air (4th & 5th Gen)

Contact our team if you would like assistance checking the compatibility of your device.

The RAM EZ-Roll’r cradle for the iPad Pro 11 secures your device in a form-fit holder while keeping the entire screen visible. Simply slide your iPad into the cradle and roll the top clip over the device to secure into place. The side buttons, camera, and charging port are conveniently exposed and accessible. This RAM EZ-Roll’r cradle also features three attachment points on the back to attach a RAM® round ball base. An attachment point on the side of the cradle allows for the placement and removal of the Apple Pencil.



FEATURES



  • Form-fit cradle for iPad Pro 11" provides a perfect fit for your device without a case
  • Compatible with B and C size RAM round ball bases for attaching a double socket arm; ball and socket technology allows for near-infinite adjustability
  • Made of high-strength composites for durability and reliability in the most demanding environments
HARDWARE INCLUDED
(4) #8-32 x 5/8" Machine Screws
(4) #8-32 Nylock Nuts

HOLE PATTERN
4-Hole AMPS: 1.181" x 1.496"

ADDITIONAL INFORMATION
For iPad Pro 11" (2020, 2021 & 2022), this holder will not allow charging of the 2nd Gen Apple Pencil. This holder may not support your iPad if it has a screen protector.


Compatible Devices

Apple
iPad Air 4
iPad Air 5
iPad Pro 11"
iPad Pro 11" (2020)*
iPad Pro 11" (2021)*
iPad Pro 11" (2022)*

Mounting Options

 

Screw-Down

  • The RAM-B-202U consists of a 1" B size rubber ball connected to a 2.5" diameter round plate. This mounting component includes pre-drilled holes using the universal AMPS hole pattern.
  • HOLE PATTERN: 4-Hole AMPS: 1.181" x 1.496", 3-Hole 120-Degree: 1.812" Diameter
  • PLATE SIZE: 2.5" Diameter

Suction Cup

  • The RAM-B-224-1U suction cup base consists of a 3.3" diameter RAM Twist-Lock suction cup connected to a RAM-B-238U diamond base with a 1" B size rubber ball. The RAM Twist-Lock suction cup base is a fan favourite for use on vehicle windshields, and provides an extra strong hold on any smooth, nonporous surface
  • SUCTION SIZE: 3.3" Diameter

Dual Pivot Suction Cups

  • With the ability to independently articulate each suction cup, this mounting base can be used in a variety of applications such as curved windows and surfaces. Whether you are mounting to a curved surface on a vehicle, or a curved windshield, this product is the ideal solution for secure suction cup mounting.
  • SUCTION SIZE: (2) 3.3" Diameter Bases, Total Width 7.95"

Tough Claw

  • The RAM Tough-Claw is the perfect mounting base for toolless installation and removal on round, square, and odd-shaped rails and bars. The small version of the RAM Tough-Claw can quickly be clamped on rails ranging from .625" to 1.14" in outer diameter and is ideal for mounting phones, tablets, action cameras, rod holders, and much more in a wide variety of applications.
  • CLAMP RANGE: .625" - 1.14" diameter

Yoke Clamp

  • The yoke clamp base will fit rails in diameter from 0.625" to a maximum of 1.25". The 1" rubber ball is at a right angle to the plane of the mount; when connected to a rail, the ball sits parallel to the rail.
  • CLAMP RANGE: .625" - 1.25"

Handlebar U-Bolt

  • Ideal for motorcycle handlebars, the RAM-B-231ZU consists of a 1" B size rubber ball attached to a zinc-coated metal U-bolt base. Designed to sit at right angles to the mounting rail, the U-bolt base accommodates rails from .5" to 1.25" in diameter. Included are black cover caps to be placed over the exposed ends of the U-bolt as well as a composite adapter that can narrow the rail to a minimum width of .5".
  • HARDWARE INCLUDED
    • (1) 1/4"-20 U-Bolt for .5" - 1" Rails
    • (1) 1/4"-20 U-Bolt for 1" - 1.25" Rails
    • (2) 1/4"-20 Nylock Nuts
    • (2) Rubber Caps
    • (1) U-Bolt Spacer
  • CLAMP RANGE: .5" - 1.25" diameter

Glare Shield Clamp

  • The RAM-B-259U is designed to mount to the lip edge of a flat surface up to 5/8" thick. Popular mounting edges include a car side window edge lip or glare shield on an airplane. The base has two composite bolts that, when tightened, clamp the base to the lip surface.
  • HARDWARE INCLUDED
    • (2) 1/4"-20 x 1.25" Composite Thumb Screws
    • (2) Rubber Caps
    • (1) 1.93" x 3.06" Rubber Adhesive Pad
  • CLAMP RANGE: .625" max

Large Strap Hose Clamp Base for Beechcraft Bonanza Aircraft

  • An alternative mounting base for aircraft such as the Bonanza or Beech with a “throw over yoke”. Accommodates rails from 2" to a maximum of 3" in diameter.
  • HARDWARE INCLUDED
    • (1) #40 Worm Drive Strap Clamp
    • (1) 6" Rubber Strip
  • CLAMP RANGE: 2" - 3" diameter
GTIN |

Whats on Sale?

A selection of current specials

What' New?

Latest Arrivals