RAM EZ-Roll'r Holder for iPad Mini 1-3 with Mounting Options

View more products from RAM Mount SKU: RAM-HOL-AP14U-SCREW


GST includedShipping Info

Current Stock
Order by 3pm and your order ships today! (Mon-Fri)
With Screw Down Mount $117.8 - We have 1 In Stock
With Handlebar U-Bolt $134.8 - We have 1 In Stock
With Single Suction Cup $141.8 - We have 1 In Stock
With Large Strap Hose Clamp $141.8 - We have 1 In Stock
With Glare Shield Clamp Base $161.8 - We have 1 In Stock
With Yoke Clamp $161.8 - We have 1 In Stock
With Tough Claw $175.8 - We have 1 In Stock
With Dual Pivot Suction Cups $227.8 - We have 1 In Stock
Cradle without mount $36.95 - We have 1 In Stock

Low Stock

If your option is out of stock don't worry more stock is on the way, select your option and enter your email address in the box and we will notify you the minute the shipment arrives


  • 1x iPad holder (cradle)
  • 1x arm (3" length)  and 1x choice of mount (optional)

Choose from one of 9 mounting options:

  • Cradle without mount
  • Cradle with RAM Screw down mount
  • Cradle with RAM Single Suction mount
  • Cradle with RAM Tough-Claw yoke mount
  • Cradle with RAM Yoke Clamp
  • Cradle with RAM Handlebar U-Bolt
  • Cradle with RAM Glare Shield Clamp for aircraft glare shield or car window ledge.
  • Cradle with RAM Large Strap Hose Clamp for Beechcraft Bonanza aircraft
  • Cradle with RAM Dual Pivot Suction mount

Fits the iPad Mini, Mini 2 and Mini 3. Not compatible with the iPad Mini 4, 5 or 6.

Contact our team if you would like assistance checking the compatibility of your device.


The RAM EZ-Roll’r cradle for the iPad mini, iPad mini 2, and iPad mini 3 secures your device in a form-fit holder while keeping the entire screen visible. Simply slide your iPad into the cradle and roll the top clip over the device to secure into place. The side buttons, camera, and charging port are conveniently exposed and accessible. This RAM EZ-Roll’r cradle also features two attachment points on the back to attach a RAM round ball base.
  • Hardware included:  (4) 8-32 x 5/8" Machine Screws, (4) 8-32 Nylock Nuts
  • Hole pattern: 4-Hole AMPS: 1.181" x 1.496"
  • Materials: High strength composite
  • Weight:  0.3 lb
This holder may not support your iPad if it has a screen protector.

Mount Specifications

Screw Mount: 

  • Plate size 2.5" diameter, hole pattern 4-Hole AMPS: 1.181" x 1.496"
  • 3-Hole 120-Degree: 1.812" Diameter. Weight capacity - Standard use: 2lbs, Heavy-duty use 2lbs. Marine grade aluminium.

Suction Mount

  • The RAM-B-224-1U suction cup base consists of a 3.3" diameter RAM Twist-Lock suction cup connected to a RAM-B-238U diamond base with a 1" B size rubber ball. The RAM Twist-Lock suction cup base is a fan favorite for use on vehicle windshields, and provides an extra strong hold on any smooth, nonporous surface. 3.3" diameter.

Tough Claw

  • Clamp Range: 0.625" - 1.14" diameter
  • The RAM Tough-Claw is the perfect mounting base for toolless installation and removal on round, square, and odd-shaped rails and bars. The small version of the RAM Tough-Claw can quickly be clamped on rails ranging from .625" to 1.14" in outer diameter and is ideal for mounting phones, tablets, action cameras, rod holders, and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars of bicycles and motorcycles, or even on kayak rails and roll bars. Overall Height: 4.24", Overall Width: 1.18"

Handlebar U-Bolt

  • Clamp Range:  0.5" - 1.25" diameter
  • Ideal for motorcycle handlebars, consists of a 1" B size rubber ball attached to a zinc-coated metal U-bolt base. Designed to sit at right angles to the mounting rail, the U-bolt base accommodates rails from .5" to 1.25" in diameter. Included are black cover caps to be placed over the exposed ends of the U-bolt as well as a composite adapter that can narrow the rail to a minimum width of .5".

 Hardware included:
(1) 1/4"-20 U-Bolt for .5" - 1" Rails
(1) 1/4"-20 U-Bolt for 1" - 1.25" Rails
(2) 1/4"-20 Nylock Nuts
(2) Rubber Caps
(1) U-Bolt Spacer

 Yoke Clamp:

Perfect for Cessna and Piper aircraft.

  • Clamp Range 0.625" - 1.25" 
  • The yoke clamp base will fit rails in diameter from 0.625" to a maximum of 1.25". The 1" rubber ball is at a right angle to the plane of the mount; when connected to a rail, the ball sits parallel to the rail.

Glare Shield Clamp

The RAM-B-259U is designed to mount to the lip edge of a flat surface up to 5/8" thick. Popular mounting edges include a car side window edge lip or glare shield on an airplane. The base has two composite bolts that, when tightened, clamp the base to the lip surface. A RAM 1" diameter rubber ball is connected to the base allowing you to connect a RAM 1" diameter arm socket and connection plates to create the perfect mount for your application. 

  • Clamp range 0.625" max
  • Ball size: B Size (1")
  • Weight Capacity: Standard Use: 2 lbs, Heavy-Duty Use: 1 lb 

    Hardware Included
    (2) 1/4"-20 x 1.25" Composite Thumb Screws
    (2) Rubber Caps
    (1) 1.93" x 3.06" Rubber Adhesive Pad

    Dual Pivot Suction Cup

    RAM suction cups are regarded as one of the most impressive suction cups in the world. Their incredible holding power is surprising when considering how most suction cups function. When two suction cups are used together the performance is amazing. The RAM Dual Articulating Suction Cup is an amazing innovation in suction cup mounting. With the ability to independently articulate each suction cup, this mounting base can be used in a variety of applications such as curved windows and surfaces. Whether you are mounting to a curved surface on a vehicle, or a curved windshield, this product is the ideal solution for secure suction cup mounting.

    • Suction Size:  (2) 3.3" Diameter Bases, Total Width 7.95"
    • Weight Capacity: Standard Use 2 lbs, Heavy-Duty Use: 1 lb


    Large Strap Hose Clamp Base for Beechcraft Bonanza Aircraft

    The RAM-B-108B-STRAP40U accommodates rails from 2" to a maximum of 3" in diameter. To mount the RAM-B-108B-STRAP40U base, place the saddle shaped plate on the rail then wrap the metal clamp strap around the rail and plate. Tighten the screw knob on the metal strap with a screwdriver until the strap has a firm hold on the rail. The RAM-B-108B-STRAP40U is an alternative mounting base for aircraft such as the Bonanza or Beech with a “throw over yoke”.
    • Hardware included: (1) #40 Worm Drive Strap Clamp, (1) 6" Rubber Strip
    • Clamp Range: 2" - 3" diameter
    • Weight Capacity: Standard Use: 2 lbs, Heavy-Duty Use: 1 lb
    GTIN |

    Whats on Sale?

    A selection of current specials

    What' New?

    Latest Arrivals